|
|
Sanitary installations and gas pipeline in the factory
Strnadová, Petra ; Vrána, Jakub (referee) ; Vaščáková, Alena (advisor)
Diploma thesis is aimed to drainage of the sewerage and rain waters, drinkable water and fire-extinguishing water supply and supply of the gas to the gas appliances. Theoretical part is dealing with the sewerage water and its usage. Technical part is dealing with the building water distribution to sanitary installations and gas installations in the chosen solution.
|
|
|
Revitalization of a multi-purpose building in the village
Federla, Jakub ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
|
|
Energy efficient building of kindergarte in Soběšice
Růžičková, Eliška ; Wierzbická, Helena (referee) ; Vaščáková, Alena (advisor)
The main goal of the master’s thesis is to design a new building of the nursery in Brno-Soběšice. It is one-storey building. This floor is divided to two same parts. In each of them is day room, sleeping room, office, bathroom, cloakroom for children, cloakroom for teachers with shower and toilet and stock for beds. Also there is director office, toilet, hallway, utility room, room for cleaners, sink and stocks. The vertical loadbearing structures are designed from Porotherm ceramic blocks and the hollow concrete blocks. The building is insulated by a contact thermal insulation system ETICS. The horizontal loadbearing structures and the staircase are designed from reinforced monolithic concrete slab. The roof is flat with extensive greenery. The whole construction are based on foundation passports. The building site contains also an outdoor car park with ten parking spot and garden with climbing frames. The project was performed in Autocad and visualization was performed in ArchiCad and Lumion. All constructions comply with valid standards and regulations. Master’s thesis is divided to three parts. In the first part A it deals with the construction design of a building for a building permission. It contains architectural-building solutions, building physics, situation drawing, reports, building design solutions and fire safety solutions. In the second part B it deals with the design of technical equipment of buildings. It includes the design of sewerage system, water, gas, photovoltaic panels, lighting, ventilation and heating. In the third part C it deals possible systems for the use of rainwater. I described possible systems for the use of rainwater and developed a rough calculation for the selected system.
|
|
|
Rainwater reuse in the sports and cultural center
Bardonová, Hedvika ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
The diploma thesis is focused on rainwater reuse in the sports and cultural center and elaboration of project sanitary equipment installation. The theoretical part of the thesis is focused on performance issues rainwater reuse in the buildings. In another part of thesis are drawn calculations with three variants of the design volume storage reservoir for rain water. The drawings are part of the project.
|
|
|
Use of rainwater in the company premises
Novotný, Jan ; Vaščáková, Alena (referee) ; Vrána, Jakub (advisor)
This diploma thesis deals with rainwater harvesting system in the company premises and the design of plumbing system in the newly built training center and storage hall. The new standard EN 16941-1 is described in the teoretical part. This standard deals with the use of rainwater. The experimental part solves the measurement of the non-potable water in this area. In the practical part, the acquired information is applied to the newly built object in the company premises. A project is created in the form of a technical report and drawing documentation for the use of rainwater and plumbing system.
|
|
|
Rainwater harvesting in an industrial building
Vacek, Jan ; Bárta, Ladislav (referee) ; Vrána, Jakub (advisor)
Diploma thesis contains a design the plumbing and gas installations in the industrial building. The theoretical part deals with the use of rainwater in the building as the process water and the experimental determination of the flow rate and water needs for the manufacturing and storage hall with built-office. The calculation part deals with the design of variants of plumbing and gas installations in the building manufacturing and storage hall with built-office. The practical part contains a design and project documentation of selected variants plumbing and gas installations in the manufacturing and storage hall with built-office, and the use of rainwater in this type of building.
|
|
|
Multipurpose Educational Centre
Drahokoupilová, Barbora ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The objective of my diploma thesis is to design multipurpose educational centre. The project consists of three parts. The aim of the first one is to create the architectural and structural design. The building is mainly centred around four common rooms accompanied by a simple kitchen and basic amenities. It is a two-storey building with a green roof. Its floor area is 327 m2. The vertical load-bearing structures are masonry, specifically made of aerated concrete blocks. The horizontal load-bearing structures are designed as cast-in-place reinforced concrete slabs. Envelope walls are insulated with mineral wool because of its elliptical floor plan. The foundation is cast-in-situ concrete slab. The second part focuses on a building services design. Domestic hot water and heating is provided by a gas boiler and electricity is partly supplied by a photovoltaic system. The building has mechanical ventilation with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden. The third part relates to facility management. It focuses on facility operations and core and non-core activities.
|
|
|
Revitalization of a multi-purpose building in the village
Federla, Jakub ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
|
|
Energy efficient building of kindergarte in Soběšice
Růžičková, Eliška ; Wierzbická, Helena (referee) ; Vaščáková, Alena (advisor)
The main goal of the master’s thesis is to design a new building of the nursery in Brno-Soběšice. It is one-storey building. This floor is divided to two same parts. In each of them is day room, sleeping room, office, bathroom, cloakroom for children, cloakroom for teachers with shower and toilet and stock for beds. Also there is director office, toilet, hallway, utility room, room for cleaners, sink and stocks. The vertical loadbearing structures are designed from Porotherm ceramic blocks and the hollow concrete blocks. The building is insulated by a contact thermal insulation system ETICS. The horizontal loadbearing structures and the staircase are designed from reinforced monolithic concrete slab. The roof is flat with extensive greenery. The whole construction are based on foundation passports. The building site contains also an outdoor car park with ten parking spot and garden with climbing frames. The project was performed in Autocad and visualization was performed in ArchiCad and Lumion. All constructions comply with valid standards and regulations. Master’s thesis is divided to three parts. In the first part A it deals with the construction design of a building for a building permission. It contains architectural-building solutions, building physics, situation drawing, reports, building design solutions and fire safety solutions. In the second part B it deals with the design of technical equipment of buildings. It includes the design of sewerage system, water, gas, photovoltaic panels, lighting, ventilation and heating. In the third part C it deals possible systems for the use of rainwater. I described possible systems for the use of rainwater and developed a rough calculation for the selected system.
|
|
|
Sanitary installations and gas pipeline in the factory
Strnadová, Petra ; Vrána, Jakub (referee) ; Vaščáková, Alena (advisor)
Diploma thesis is aimed to drainage of the sewerage and rain waters, drinkable water and fire-extinguishing water supply and supply of the gas to the gas appliances. Theoretical part is dealing with the sewerage water and its usage. Technical part is dealing with the building water distribution to sanitary installations and gas installations in the chosen solution.
|
guest ::
